Sitrak C7H AZ9725290065 NH:4c PTO Assembly (Compatible with ZF Traxon Transmission : Gear Ratio 0.78 : 430 Nm : Direct Drive)4
Sitrak C7H AZ9725290065 NH/4c PTO Assembly | Ultimate SINOTRUK Power Take-Off for ZF Traxon
2026-06-04
Sitrak C7H 812W61701-6287 Shift Knob Assembly (Wide-Body)5
Sitrak C7H 812W61701-6287 Shift Knob Assembly (Wide-Body) | Ultimate SINOTRUK Ergonomic Control
2026-06-04
Sitrak C7H AZ9370312010 Driveshaft | SINOTRUK Genuine Powertrain Component

Sitrak C7H AZ9370312010 Driveshaft | Ultimate SINOTRUK Heavy-Duty Driveline

@media (max-width: 640px) { h1 { font-size: 1.85rem !important; } }
Sitrak C7H AZ9370312010 Driveshaft - SINOTRUK Genuine Part
Driveshaft | OEM AZ9370312010

Sitrak C7H AZ9370312010 Driveshaft (Driveshaft) is a genuine SINOTRUK powertrain component engineered to transmit torque from the transmission to the rear axle differential.

This Sitrak C7H AZ9370312010 Driveshaft features precision-balanced tubular construction with high-strength universal joints. It accommodates suspension articulation while delivering smooth, reliable power transfer under heavy loads.

Manufactured from high-grade steel tubing with dynamically balanced flanges, the driveshaft offers exceptional durability and vibration-free operation for Sitrak C7H heavy trucks.

Learn more about driveline engineering from this resource on driveshaft design.

Technical Specifications – Driveshaft

OEM NumberAZ9370312010
English NameDriveshaft
BrandSINOTRUK | CNHTC
ApplicationSitrak C7H – transmission to rear axle
Tube Diameter95 mm
Wall Thickness4.0 mm
Length (Flange to Flange)1,520 mm
Weight28.5 kg
U-Joint TypeCross and bearing (sealed, maintenance-free)
Flange Pattern8-hole (pilot diameter 120mm)
Balancing StandardISO 1940-1, Grade G16
Max Operating Speed4,000 RPM
CertificationIATF 16949, ISO 9001:2015, RoHS
Warranty24 months / 300,000 km
PackagingWooden crate with foam supports
Compatible ModelsSitrak C7H 6×4 / 8×4 (2013-present)
Genuine SINOTRUK driveshaft – dynamically balanced for smooth power transfer and long service life.

Critical Powertrain Component for Heavy-Haul

The Sitrak C7H AZ9370312010 Driveshaft is a critical component that transfers engine torque from the transmission output to the rear axle input, enabling vehicle propulsion.

This driveshaft features high-strength steel tubing that resists torsional deflection under high torque, precision-welded end yokes, and heavy-duty universal joints. Each unit is dynamically balanced to G16 grade, ensuring vibration-free operation at highway speeds.

The maintenance-sealed U-joints eliminate periodic greasing requirements while providing long service life. The corrosion-resistant coating protects against road salt and environmental exposure.

Replacing a worn, bent, or damaged driveshaft with this genuine SINOTRUK component restores smooth power delivery, reduces driveline vibration, and prevents catastrophic failure. See driveshaft engineering standards for more information.

Heavy-Duty Packaging & Global Logistics

Sinotruk Sitrak genuine parts export packaging – driveshaft
Factory-sealed export packaging for SINOTRUK driveshaft – custom wooden crate with foam supports

Each Sitrak C7H AZ9370312010 Driveshaft is coated with anti-rust oil, wrapped in VCI paper, and secured in a custom wooden crate with foam end supports to prevent bending during transit.

For bulk orders, driveshafts are stacked with wooden separators and strapped. Packaging meets ISTA 1A standards for heavy components.

Shipping methods: Sea freight (FCL only due to length), air freight for urgent needs. Real-time tracking with pre-shipment photos.

Documentation: Packing list, commercial invoice, certificate of origin, dynamic balance report, and SINOTRUK quality certificate.

Key Advantages of Genuine SINOTRUK Driveshaft

Precision balance: ISO 1940-1 G16 grade ensures vibration-free operation up to 4,000 RPM.

High torque capacity: 95mm diameter tube with 4mm wall for extreme torsional strength.

Maintenance-free joints: Sealed U-joints eliminate periodic greasing.

OEM fitment: Exact flange pattern and length for direct replacement.

Compatible Models & Installation Guide

This genuine Sitrak C7H AZ9370312010 Driveshaft fits SINOTRUK Sitrak C7H models including:

– C7H 6×4 tractor units (540/460/440 hp, 2013–present)

– C7H 8×4 dump truck and mixer chassis

Not compatible with 4×2 variants (different length required). Replaces OEM numbers: AZ9370312010, AZ9370312011, AZ9370312012.

Installation steps: Secure vehicle on lift. Mark flange positions before removal. Remove driveshaft bolts from transmission and axle flanges. Support shaft with safety strap. Remove old driveshaft. Clean flange surfaces. Install new driveshaft aligning marked positions. Torque bolts to 180 Nm. Professional installation recommended due to weight (28.5 kg).

For reference, see IATF 16949 quality standards for driveline component manufacturing.

Quality Assurance & SINOTRUK Certification

All Sitrak C7H AZ9370312010 Driveshaft units are manufactured in IATF 16949-certified facilities with full material traceability.

Each driveshaft undergoes:

– 100% dynamic balancing (ISO 1940-1 G16)

– Tube straightness and wall thickness inspection

– Weld penetration testing (ultrasonic)

– U-joint torque and articulation test

– Corrosion protection verification (salt spray)

Every product is stamped with SINOTRUK logo, OEM number, and balance correction data. A test report including balance certificate, material certificate (EN 10204 3.1), and dimensional results accompanies each shipment.

This driveshaft is backed by a 24-month unlimited-mileage warranty against manufacturing defects.

Global Stock & Rapid Fulfillment Network

We maintain over 180 units of Sitrak C7H AZ9370312010 Driveshaft in our Jinan central warehouse, plus regional stock in Dubai and Kazakhstan for emergency fleet support.

For urgent orders, express freight achieves 5-7 days worldwide. Standard sea freight (FCL only) departs weekly from Qingdao port.

HS code: 8708.50. All driveshafts are shipped in certified export crates with full customs documentation.

With 18+ years of SINOTRUK genuine parts export experience, we provide pre-shipment photos, real-time tracking, and customs clearance support.

SINOTRUK Genuine Powertrain Component | OEM AZ9370312010 – Driveshaft | Specifications subject to engineering validation
Technical references: Driveshaft Engineering | Heavy Duty Trucks | IATF 16949

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
We are Sinotruksitrak. Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us! Please leave your phone or what'sApp
:
:
This chat session has ended