Sitrak C7H Q40308 Spring washer2
Sitrak C7H Q40308 Spring Washer | Essential SINOTRUK Vibration Locking Fastener
2026-06-05
Sitrak C7H Q40108 Flat washer2
Sitrak C7H Q40108 Flat Washer | Essential SINOTRUK Load Distribution
2026-06-05
Sitrak C7H Q40306 Spring Washer | SINOTRUK Genuine Locking Fastener

Sitrak C7H Q40306 Spring Washer | Essential SINOTRUK Vibration Locking

@media (max-width: 640px) { h1 { font-size: 1.85rem !important; } }
Spring washer Q40306 view 1
Spring washer Q40306 view 2
Spring washer | OEM Q40306

Sitrak C7H Q40306 Spring washer (Spring washer) is a genuine SINOTRUK locking fastener designed to prevent bolt loosening under vibration and dynamic loads.

This Sitrak C7H Q40306 Spring washer exerts a constant axial force between the bolt head/nut and the bearing surface. The split-coil design maintains tension even when vibration attempts to rotate the fastener.

Manufactured from high-carbon spring steel with precise heat treatment, each washer delivers consistent spring force and corrosion resistance. The zinc-nickel coating offers exceptional durability.

Learn more about fastener engineering from this resource on spring washer design.

Technical Specifications – Spring Washer

OEM NumberQ40306
English NameSpring washer
BrandSINOTRUK | CNHTC
ApplicationSitrak C7H – chassis, suspension, engine mounting, vibration-prone fastening
MaterialHigh-carbon spring steel (65Mn / SK5 grade)
Surface FinishZinc-nickel coating (480h salt spray protection)
Inner Diameter (ID)6.2 mm (fits M6 bolt)
Outer Diameter (OD)12.0 mm
Thickness (Free Height)1.6 mm
Compressed Height0.8 – 1.0 mm
Hardness40-50 HRC (hardened and tempered)
Spring Force (at compression)50-70 N
CertificationIATF 16949, ISO 9001:2015, RoHS
Testing Standard100% dimensional inspection, spring force test, salt spray test
Warranty24 months against manufacturing defects
Packaging Quantity100 pcs per poly bag or bulk carton (1,000 pcs)
Temperature Range-50°C to +120°C
Compatible ModelsSitrak C7H (all variants), HOWO T7H, A7 series – general fastening
Genuine SINOTRUK spring washer – split-coil locking action prevents vibration loosening.

Vibration-Resistant Locking for Critical Joints

The Sitrak C7H Q40306 Spring washer is designed for use in high-vibration environments such as chassis frames, suspension linkages, and engine mounts.

Unlike flat washers, the split-coil design provides spring tension that maintains a residual load on the fastener even after initial torque relaxation. This spring action prevents the bolt or nut from rotating loose under vibration.

The sharp edges of the split coil also bite into both the bolt head/nut and the bearing surface, creating mechanical resistance to rotation. When compressed flat, the washer exerts its maximum locking force.

Replacing worn, crushed, or corroded spring washers with these SINOTRUK genuine components restores vibration resistance and prevents joint failure. See heavy-duty truck assembly standards for more context.

Protective Packaging & Global Logistics

Sinotruk Sitrak genuine parts export packaging – spring washers
Factory-sealed export packaging for SINOTRUK spring washers – anti-static poly bags and cartons

Sitrak C7H Q40306 Spring washer are packaged in anti-static poly bags with desiccant, then placed in heavy-duty export cartons. For large orders, cartons are palletized and stretch-wrapped.

Each carton includes a label with OEM number, batch code, quantity, and certification reference. Packaging meets ISTA 1A standards for vibration protection.

Shipping methods: Sea freight (FCL/LCL from Qingdao), express courier (DHL/FedEx 3-5 days), air freight for urgent needs. Real-time tracking with pre-shipment photos.

Documentation: Packing list, commercial invoice, certificate of origin, material test certificate (EN 10204 3.1), and SINOTRUK quality certificate.

Key Advantages of Genuine SINOTRUK Spring Washer

Vibration resistance: Split-coil design maintains tension and prevents loosening.

Spring tension: Provides residual preload even after torque relaxation.

Corrosion protection: 480h salt spray resistance ensures reliable performance.

Standard dimension: Compatible with all M6 fasteners per DIN 127.

Compatible Applications & Usage Guide

These genuine Sitrak C7H Q40306 Spring washer are direct replacements for original fasteners in the following applications:

– Chassis crossmember attachment points under vibration

– Engine mounting brackets to frame rails

– Suspension component connections (spring hangers, torque rods)

– Cab mounting pivot brackets

– Fender and fuel tank brackets

Equivalent to DIN 127 / ISO 127B (standard spring washer). Replaces OEM numbers: Q40306, Q40306G, and 9000984215.

Usage guidelines: Always place spring washer between bolt head/nut and flat washer. Ensure split ends face the bolt head or nut. Do not over-torque as it may crush the washer completely. Replace if washer shows permanent deformation, cracks, or loss of spring tension. Each bulk pack includes hardness certification and batch traceability.

For reference, see IATF 16949 quality standards for fastener manufacturing processes.

Quality Assurance & SINOTRUK Certification

All Sitrak C7H Q40306 Spring washer are manufactured in IATF 16949-certified facilities with full material traceability from steel mill to finished product.

Each production batch undergoes:

– Dimensional inspection using optical sorting machines (100%)

– Hardness testing per Rockwell HRC scale (40-50 HRC range)

– Spring force testing (50-70 N at specified compression)

– Salt spray testing (480 hours, ASTM B117)

– Flatness and coil gap inspection

Every washer is free from burrs, cracks, and surface defects. A test report including material certificate (EN 10204 3.1) and coating verification accompanies each shipment.

These washers are backed by a 24-month warranty against manufacturing defects.

Global Stock & Rapid Fulfillment Network

We maintain over 380,000 units of Sitrak C7H Q40306 Spring washer in our Jinan central distribution center, plus regional stock in Dubai, Kazakhstan, Colombia, and Peru.

For urgent orders, express courier delivery achieves 3-5 days worldwide. Standard sea freight (LCL/FCL) departs weekly from Qingdao port.

HS code: 7318.21. The lightweight design allows economical shipping even for large quantities. All packaging is recyclable and complies with ISPM 15.

With 18+ years of SINOTRUK genuine parts export experience, we provide pre-shipment photos, real-time tracking, and customs clearance support for fastener shipments.

SINOTRUK Genuine Fastener | OEM Q40306 – Spring washer | Specifications subject to engineering validation
Technical references: Washer Engineering Standards | Heavy Duty Truck Assembly | IATF 16949

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
We are Sinotruksitrak. Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us! Please leave your phone or what'sApp
:
:
This chat session has ended